Switch The Power Manager On / Off; Switch Electric Appliances On / Off; Use Of The Usb Hub (Only For Pma Usb De V2); Power Adaptor For Usb Hub (Only For Pma Usb De V2) - brennenstuhl PMA DE V2 Instrucciones De Utilización Y De Seguridad

Switch the Power Manager
q
on / off
Set the master ON / OFF switch
i
I to switch the Power Manager on.
Set the master ON / OFF switch
i
0 to switch the Power Manager off.
Note: If the Power Manager is switched off,
all connected appliances are also switched off
automatically.
Switch electric appliances
q
on / off
Make sure that the Power Manager is switched
i
on (see "Switch the Power Manager on / off ").
Set the respective ON / OFF switch
i
I to switch the connected appliance on. The
respective ON / OFF switch
connected appliance is on.
Note: Socket and respective ON / OFF switch
are arranged in the same order.
3
Set the respective ON / OFF switch
i
tion 0 to switch the connected appliance off.
Use of the USB hub
q
(only for PMA USB DE V2)
First connect the type-B USB jack (square) of
i
the USB line (included) with the connection
socket .
6
Connect the other end of the USB line with the
i
USB port of your computer.
Now connect the type-A USB jack (flat) of the
i
respective appliance with one of the 4 USB
ports . Now you can use the Power Manager
4
as USB hub for your computer.
PowerManager_Content_072016_EU.indd 13
Operation / Cleaning and maintenance
q
to position It is possible to externally supply the USB hub with
1
electricity using a power adaptor (not included).
to position This may be necessary for the use of specific USB
1
devices.
i
i
i
to position
3
q
lights up if the
3
The Power Manager has an integrated surge pro-
tection (19.500 A), which protects the connected
electric appliances from voltage peaks (e.g. indirect
to posi- lightning).
3
-
-
q
-
Q
Keep the device away from rain and moisture. Ingress
of moisture increases the risk of electric shock.
Power adaptor for USB hub
(only for PMA USB DE V2)
Plug the connection of the power adaptor
(5 V / 2.5 A DC ) (not included) into
the power adaptor socket
Plug the power plug of the adaptor into a
properly installed outlet.
Disconnect the adaptor from the adaptor socket
when the adaptor is not connected to the
5
mains.

Surge protection

The surge protection is active when the LED
is on.
The surge protection has been destroyed, if the
LED remains dark when the Power Manager
2
is switched on. The power supply to the sockets
is cut.
7

User information

You can use the body of the Power Manager
as support for various appliances (e.g. notebook,
TFT display etc.) (see figure C).

Cleaning and maintenance

ELECTROCUTION HAZARD!
.
5
2
GB 13
18.07.16 16:00