Manual Pairing; Proximity Pairing; Auto Reconnect; Volume Control - LG HBM-235 Manual Del Usuario

How to use
•After 10 seconds, the HBM-235 will automatically enter pairing mode.
•When the headset enters pairing mode, the LED indicator will show a solid
white light.
•Using your handset, find the Bluetooth menu and "search for" or "add" new
devices.
•Select "LG HBM-235" from the list of devices and pair it with your handset.
•If you are asked for the passkey or PIN during pairing, please enter "0000"
(4 zeros).
•Once pairing has been completed successfully, you will hear a beep.
•After pairing has been completed, make sure you "connect" to the LG
HBM-235. You will hear "Connected".
•If you want to pair with a different device in the future, the headset must be
placed into pairing mode.
•If the headset is in pairing mode for 3 minutes without being connected to
a handset, the HBM-235 will automatically turn off.

2) Manual Pairing

•With the power off, press and hold the MFB for 6 seconds.
•When the headset enters pairing mode, the LED indicator will show a solid
white light.
• Using your handset, find the Bluetooth menu and "search for" or "add" new
devices.
•Select "LG HBM-235" from the list of devices and pair it with your handset.
•If you are asked for the passkey or PIN during pairing, please enter "0000"
(4 zeros).
•Once pairing has been completed successfully, you will hear a beep.
•After pairing has been completed, make sure you "connect" to the LG
HBM-235. You will hear "Connected".
•If you want to pair with a different device in the future, the headset must be
placed into pairing mode.
•If the headset is in pairing mode for 3 minutes without being connected to
a handset, the HBM-235 will automatically turn off.
3) Proximity Pairing (Headset Initiated Pairing)
•Go into your handset Bluetooth menu and set your handset's Bluetooth to
Visible or Discoverable mode.
•Place the HBM-235 within 4 inches (10cm) of your handset.
6
• With the power off, press and hold the MFB on the HBM-235 for 6
seconds to enter Manual Pairing mode (solid white light).
• Press and hold the Volume Up and Volume Down buttons at the same
time for 3 seconds to place the HBM-235 in Proximity pairing Mode.
• When the headset enters Proximity Pairing mode, the LED indicator
show a solid white light.
• For 20 seconds, the HBM-235 will search for a handset that has been
placed into Discoverable or Visible mode.
• When the HBM-235 finds the handset, your handset will ask you if you
want to accept the pairing request from the HBM-235.
• Select Yes, and pair the HBM-235 with your handset.
• After your headset is paired, be sure to connect to the handset.

Auto reconnect

- If the HBM-235 is turned off (either accidentally or intentionally) while
connected to a handset, the headset and handset will disconnect.
The headset and handset will automatically reconnect when the
HBM-235 is turned back on (provided that both devices are within
the required range of 33 feet 10 meters).
[ Out of range ]
- When your handset and HBM-235 are separated by a range of 33
feet (10 meters) or more, the headset and handset will disconnect.
When the handset and HBM-235 are within the required range again,
the HBM-235 will automatically reconnect to the handset.
- If the headset and handset do not automatically reconnect when
they are back within the required range, briefly press the MFB on
the HBM-235 to reconnect manually.

Volume control

- Press the VOLUME UP or VOLUME DOWN button to adjust the
speaker volume.
- There are eight levels of speaker volume.
How to use
7