Pairing; Easy Pairing; Manual Pairing; Auto Reconnect - LG HBM-900 Manual Del Usuario

How to use

Pairing

- Prior to using the Headset for the first time, you must pair it with a
Bluetooth-enabled handset.
- There are 2 Pairing Mode Methods with the HBM-900.

1) Easy Pairing

� With the Power off, move the PWR switch to ON position, to turn on
the HBM-900.
� The Headset will enter Auto-Reconnect mode, about 10 seconds
(If your Headset has been previously paired to the handset, the Headset
will automatically reconnect to the handset, when the HBM-900 is
powered on.)
� After 10 seconds, the HBM-900 will automatically enter Paring Mode.
� When the Headset enters Pairing Mode, the LED indicator will show
a solid blue light and you will hear two short beeps.
� Using your handset, find the Bluetooth Menu and "search for" or "add"
new devices.
�Select "LG HBM-900" from the list of devices and pair it with your handset.
� When asked for the Pass/PIN code during the pairing procedure,
please enter "0000" (4 Zeros).
�Once pairing has completed successfully, you will hear two short beeps.
� After pairing successfully, be sure to "Connect" to the LG HBM-900.
�If you want to pair with a different device in the future, the Headset
must be placed in Pairing Mode.
�If the Headset is in Pairing mode for three minutes without being
connected to a handset, the HBM-900 will automatically turn off.

2) Manual Pairing

� With the Power off, press and hold the Volume Control button and
move the PWR switch to ON position.
� When the Headset enters Pairing Mode, the LED indicator will show
a solid blue light.
� Using your handset, find the Bluetooth Menu and "search for" or "add"
new devices.
� Select "LG HBM-900" from the list of devices and pair it with your handset.
� When asked for the Pass/PIN code during the pairing procedure,
please enter "0000" (4 Zeros).
� Once pairing has completed successfully, you will hear two short beeps.
� After pairing successfully, be sure to "Connect" to the LG HBM-900.
6
� If you want to pair with a different device in the future, the Headset
must be placed in Pairing Mode.
� If the Headset is in Pairing mode for three minutes without being
connected to a handset, the HBM-900 will automatically turn off.

Auto Reconnect

- When the HBM-900 turns off (accidentally or intentionally) while connected
to a handset, the Headset and handset will disconnect. The Headset and
handset will automatically reconnect when the HBM-900 is turned back on.
(as long as both devices are within the required range of 33ft. or 10m).
[ Out of range ]
- When the HBM-900 and your handset are separated by a distance of
33 feet (10 meters) or more, the Headset and handset will disconnect.
When the handset and HBM-900 are brought back within the required
distance, the HBM-900 will automatically reconnect with the handset.
- If the Headset and handset do not automatically reconnect when they
are back within the required range, briefly press the CALL button on
the HBM-900 to reconnect manually.
Auto Volume
- The HBM-900 uses an automatic volume control feature.
The volume level of the headset will automatically adjust, depending
on your environment (Louder environment = volume increase.
Quiter environment = volume decrease).

Volume control (Circulation)

- If you feel that the volume needs to be adjusted manually, briefly
press the Volume Control (circulation) button. There are eight levels
of speaker volume. The volume will increse one level, each time the
volume Button is pressed. When the headset reaches the maximum
volume level, the next press of the button will return the headset to
the lowest volume level.
How to use
7