Olympus DS-2 Instrucciones página 50

Connecting to Your PC
Connecting to your PC using the cradle
6
50
Place the recorder on the cradle
1
Connect the USB connection
cable to the USB port or the USB
hub of the PC.
2
Connect the USB connection
cable to the cradle.
Connect the
connection cable facing up to match the
3
Make sure that the recorder is in
the Stop mode, and place it in the
cradle.
"STORAGE REMOTE" is displayed on
recorder if the USB cable is connected.
PC I/F
mark of the USB
mark of the cradle connection port.