Publicidad
Idiomas disponibles
Idiomas disponibles
ATTACH BOOM TUBE TRAY TO THE CARRIER BASE.
Align holes; insert bolt
through metal washer
and tray hole, then plastic
washer as shown.
metal
washers
TO CHANGE TO DRIVER'S SIDE LOADING:
• loosen the knob until
it pops up, and the
fork base can pivot.
1032613E-2/24
plastic
washers
THE SIDEWINDER IS ASSEMBLED FOR PASSENGER SIDE INSTALLATION.
You can change the loading side or continue to step 3.
• Release the
lower end cap
by removing the
pivot bolt with two
wrenches.
3/4"
• Tighten the nut and bolt
using two wrenches.
• TighTEn so ThE TRAy
cAn sTill PivoT.
9/16"
• slide the stopper off
the base, turn and
replace the stopper.
• Reassemble the pivot
ends and tighten.
• Tighten so that the
base can still pivot.
Publicidad
