Kalorik AS 40763 Manual De Instrucciones página 10

• To put the blade back in place, proceed inversely and lock the
blade by turning the locking device counter-clockwise.
• Be very careful during this operation as the blade is very sharp!
IMPORTANT INFORMATION
• A lubricant paste is applied at the factory to ensure correct
lubrication for the first couple of usage. After this, the first time you
remove the blade, the user can remove the extra lubrication paste
or leave it. The paste is food safe. No extra lubrication will be
needed afterwards.
• Cautiously cleaning the blade surface after use as indicated in the
user manual should avoid cross-contamination. Deep cleaning by
removing the blade shall only be necessary from time to time.
www.KALORIK.com
10
AS 40763 - 200717