Polarized Plug Instructions; Short Cord Instructions - Kalorik AS 40763 Manual De Instrucciones

5. The cutting blade continues to rotate after the slicer has been
switched off. Wait until the blades have stopped completely.
6. For safety reasons, the slice thickness dial must be returned to the
"P" position after use.
7. Be careful of the blade at all times. Blade is very sharp!

POLARIZED PLUG INSTRUCTIONS

This appliance is equipped with a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this plug will fit into
the polarized outlet only one way. If the plug does not properly fit into
the outlet at first, reverse it. If it still does not fit, contact a competent
qualified electrician. Do not attempt to modify the plug in any way.

SHORT CORD INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in, or tripping over a longer cord. Extension
cords may be used if care is exercised in their use.
• The electrical rating of the extension cord should be at least that of
the appliance. If the electrical rating of the extension cord is too
low, it could overheat and burn.
• The resulting extended cord should be arranged so that it will not
drape over the counter top or tabletop where it can be pulled on or
tripped over.
IMPORTANT INFORMATION
This appliance is not for commercial use. You should follow the
requested breaks. Failure to follow this instruction carefully may result in
damage to the motor. Please refer to the rating label for the maximum
continuous usage time (KB xx min where xx is the maximum usage time).
The breaks should last at least 30 minutes.
PARTS DESCRIPTION
See page 2-3.
www.KALORIK.com
6
AS 40763 - 200717