XBOX 360 Manual Del Usuario página 25

addWireleSSControllerS
Up to four controllers, wired and wireless, can
be actively connected to a console at one
time. Each connected controller gets a
quadrant on the Ring of Light. Before you can
connect a wireless controller, at least one
quadrant must be free (unlit). To disconnect a
To connect your wireless controller to your console:
24
wireless controller, press and hold the
wireless controller Xbox Guide button for
three seconds, then choose to turn it off.
For a wired controller, disconnect the cable
connector.
Press and hold down the Xbox Guide
1
button until the controller turns on.
Make sure the console is turned on. If not,
2
press the Power button.
Press and release the Connect button on
3
the console.
Press and release the Connect button on
4
the controller.
After the Ring of Light on the controller
5
and console spin and flash once, the
controller is connected. The quadrant
that remains lit indicates the
controller's position.