Important; Remote Installation (Optional) - Thermador VCIN60RP Instrucciones De Instalación

25 ft. Blower Cable
Connection (optional)
EXTNCB25 Parts Included
1 – 25 ft. cable
1 – Adapter Cable No. 1
(NOT NEEDED FOR VCIN
MODEL CONNECTIONS)
1 – Adapter Cable No. 2
IMPORTANT: Cutting off a connector to the appliance or
to the extension cable kit will void the warranty.
Blower Extension Cable Connection
The internal blower harness should be routed through the
knockout and secured with a 1'' (25.4 mm) strain relief. The
remote harness can then be connected to the blower
harness outside the unit.
Connects to
Remote or
Inline blower
inches (millimeters)
15 15 15
ʺ ʺ
/ /
16 16 16
3 3
ʺ ʺ
/ /
8 8
Installation Instructions
Connects
to hood
25ft cable
Figure 19: 25ft Cable
11
ʺ (17)
/
16
3 3
/ /
16 16 16
3 3
ʺ ʺ
/ /
8 8
Remote Control Installation
(optional)
Before you begin, read these instructions carefully. It is
recommended that the Remote Control be wired to the
hood after the hood is installed.
VCI12REMKS Parts Included
IMPORTANT: Cutting off a connector to the appliance or to
the extension cable kit will void the warranty.
NOTE: When using the Custom Insert with the optional
Remote Control, the unit loses the AUTO function and the
Over-temperature Heat Sensor described in the Use and
Care Guide.
Wall Preparation
1. Prepare wall (or similar surface) cutout for installation
as shown below (view is shown facing wall).
ʺ ʺ
3 ʺ
/
8
Figure 20: Wall Cutout (view is shown facing wall)
1 – Remote control
2 – 3 ft. input/power harnesses
1 – 30 ft. extension harness
11
ʺ (17)
/
16
ʺ ʺ
3 3
/ /
8 8
5 5
ʺ ʺ
/ /
8 8
9 /
16 ʺ
English | 16 |