Installing Filters And Grease Trays - Thermador VCIN60RP Instrucciones De Instalación

Installing Grease Trays and
Filters
1. Remove all plastic from hood pieces.
2. Insert in the following order:
a) Grease trays — push down and in. The grease
trays must be in place before installing the filters.
-- The small grease tray must be installed in the
.
center of hood
Installation Instructions
Figure 29: Grease Tray
b) Filters — start with inserting the smaller, 8'' filter in
the middle and work out to the ends. Push up, slide
toward the front of the hood, then push in at the
bottom (Figure 30).
-- The 8" filter must be installed in the center of hood
at all times.
3
3. Reverse the above directions to remove the grease
trays and filters.
NOTE: DO NOT use burners, elements, or oven while
hood is disassembled.
2
1
Figure 30: Filters
English | 19 |