Lenco HPW-400 Manual Del Usuario página 16

5.3
Tone correction:
You may use the TONE push-button on the base to enable the tone
correction and to adjust the sound to your own preferences. Tone signals in
the ear speakers will inform you of the chosen setting:
•
1 tone signal: treble is boosted
•
2 tone signals: treble & bass are boosted
•
3 tone signals: only the bass is boosted
•
long tone signal: no tone correction
Attention, this tone correction only influences the signal send via the base
to the headset. It has no effect on the pitch of the microphone build into
the headset. See also the following item.
5.4
Microphone function:
The headset is provided with a built-in microphone. This microphone
amplifies the sounds coming from your immediate vicinity (such as a
conversation) to reproduce them through the ear speakers.
Switch on the headset and 1x press the MIC button to enable this
function; the green status indicator will illuminate.
Press the MIC button again to disable this function. Attention, the push-
button for the tone correction (see above) has no effect on the
microphone sound.
The TV, radio, etc. connected to the base doesn't need to be switched on to
use this function.
16