Milnor MilTouch-EX 48040H7K Guía Del Operario página 22

Chapter 1. How to Use the MilTouch-EX
5. Touch the External Storage button to see a list of the available wash formula files.
6. To copy the wash formulas from the machine to the USB flash drive, touch the Data Set
Name button.
7. To copy the wash formulas from the USB flash drive to the machine controller, touch the
desired wash formula button in the list at the left of the Transfer Direction buttons.
8. Touch the available Transfer Direction button. Only one of these two buttons will be enabled.
9. When the transfer is complete, confirm the transfer, then store the flash drive in a safe place.
The Data Log Displays
1.1.1.4.
Home display (see
Note 1: Data log displays are not available in version 2.0.112 of the display software. Version data is on
the Home display
The Date Selection Display
1.1.1.4.
1.
Figure 7: Date Selection Display
The Production Display
1.1.1.4.
2.
name, the start time, and the end time for the formula.
PELLERIN MILNOR CORPORATION
™
Washer-Extractor Control
—To view the accumulated data, touch the View Logs button on the
Figure 1).
(Figure 1).
—Touch the date for the log files you want to view.
—The Production display shows the wash formula number and
18