Milnor MilTouch-EX 48040H7K Guía Del Operario página 43

Figure 31: Flow meter button
8. When the Flow Meter Calibration screen
field to reset to 0.
Figure 32: Flow Meter Calibration screen
9. Touch the Water Valve Start button
the calibration container. The flow meter count value increases as water flows past the flow
meter.
10. When the desired weight or volume of water is in the container, touch the Water Valve Stop
button. Do not overfill the container!
11. Touch the Water Quantity button to open the Water Quantity screen
Chapter 2. How to Configure and Program the Control
(Figure 32) appears, wait for the flow meter count
(Figure 32) to open the water valves. Water flows into
39
(Figure 33).
PELLERIN MILNOR CORPORATION