a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone
Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're not selecting any
cooking zone.
Touch "+" the controls of the timer. The minder
indicator will start flashing and "10" will show
in the timer display.
Set the time by touching the "-" or "+" control
of the timer
Hint: Touch the "-" or "+" control of the timer
once to decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer to decrease or
increase by 10 minutes.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
Buzzer will beep for 30 seconds and the timer
indicator shows "- - " when the setting time finished.
b) Setting the timer to turn one or more cooking zones off
Touching the heating zone slider control
Set the time by touching the or control of the timer
Hint: Touch the "-" or "+" control of the timer
once will decrease or increase by 1 minute.
Touch and hold the "-" or "+"control of the timer
will decrease or increase by 10 minutes.
When the time is set, it will begin to count down immediately. The display
will show the remaining time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
Set one zone
EN-13