STEP 10: FINAL ASSEMBLY
Mount the video door station on the mounting plate. The video door station
will click into the locking positions intended for the mounting plate. Use the
accompanying safety screw with the appropriate tool to fix the video door
station to the underside of the mounting plate.
STEP 11: ACTIVATING THE VIDEO DOOR STATION
Switch on the power to the wires leading to the assembly location again.
You can see whether you have connected the power supply properly from the
Diagnostic LED (it lights up once the power has been connected correctly
for up to five minutes and continuously in night-vision mode). The video door
station is ready for operation (booting up process, any software updates, etc.)
once it has emitted a short diagnosis sound from the integrated loudspeaker.
This may last for up to 5 minutes. Should you not hear a beep, please check
the power supply. Please also check whether you have used a wall-plug
power-supply and not PoE and whether you have connected the positive
pole and negative pole to the video door station correctly.
STEP 12: DOWNLOADING AND INSTALLING THE APP
Download the „DoorBird" app by Bird Home Automation onto your mobile
device from the Apple app store or Google Play store. You can always find the
most up-to-date version of the App manual on www.doorbird.com/support
If you use WiFi for connecting the video door station to your Internet router,
first go to „Settings > WiFi Setup" and follow the instructions.
If you have finished the WiFi set-up or have connected the video door station
to your Internet router by means of a network cable, go to „Settings > Add
device" and click on the QR code icon in the „User" field. Scan the user QR
code found on the „Digital Passport" that accompanies the video door station.
If you have problems adding the video door station to the App please check
if the video door station is online ( www.doorbird.com/checkonline ). If the
video door station is not online, please check the WiFi or network cable
connection again.
Since Apple uses very high quality microphones, loudspeakers and digital audio
components that are perfectly in tune with one another, the voice quality with
an iPhone or iPad is usually noticeably better than with an Android smartphone
or Android tablet.
DIAGNOSTIC-LED
This LED light is only lit up for five minutes after the video door station has
been supplied with power (and continuously at night). It lights up as soon as
the video door station is supplied with power.
∙ Illuminated: Device is powered
16
DIAGNOSTIC-SOUNDS
After around two to five minutes, the video door station emits brief diagno-
stic sounds after it has been connected to the power grid.
∙ 1x diagnostic sound: The video door station is connected to the Internet
∙ 2x diagnostic sounds: The video door station is able to communicate with
the router, but cannot access the Internet
∙ 3x diagnostic sounds: The video door station has no connection to the network
TECHNICAL SPECIFICATIONS
GENERAL
Power supply:
15 V DC (power 110 - 240 V AC) or
Power over Ethernet (PoE 802.3af
Mode-A)
Connectors:
Power, electric door opener/strike,
door chime, door opener button,
network
Weather-proof:
Yes, IP65
Approvals:
CE, IC, FCC, IP65
Operating conditions:
-20 to +40°C / -4 to 104°F
Humidity 10 to 85 % RH
(non condensing)
Scope of delivery:
Video Door Station, mounting plate,
power supply unit (world-wide,
110 - 240 V), DIN-rail power supply
sold separately, screw package,
quick start guide
Warranty:
see www.doorbird.com/warranty
CURRENT SYSTEM REQUIREMENTS
System requirements:
Mobile Device: Newest iOS on
iPhone/iPad, newest Android on
Smartphone/Tablet
Internet: High-Speed Landline
Broadband Internet connection, DSL,
Cable or fiber optic, no socks or Proxy
server
Network: 802.11 b/g/n 2.4GHz or
Ethernet Network, with DHCP
Recommended installation height:
Camera lens should be at a min.
height of 125 cm (49 in)
VIDEO
Camera:
HDTV 720p, dynamic (VGA – HDTV)
Lens:
High-end ultra wide-angle hemispheric
lens 180° horizontal, 90° vertical,
straightened, IR-capable
Night-vision:
Yes, light sensor, automatic IR-cut
filter, 12 IR-LEDs
17