SMA RoofCommKit-P1-US-IA-11 Serie Instrucciones De Instalación página 24

5 Connection
• Place the conductors L1 and L2 into the terminal points in accordance with the labelling
(round openings) L1 and L2 as far as possible.
5.
Danger of fire due to incorrectly plugged conductors
By inserting the conductors into the actuation shafts, a fire may occur.
• Ensure the conductors are plugged into the
terminal points (round openings) as far at
is will go and not into the actuation shafts
(rectangular openings).
6. Ensure that the terminal points are allocated to the correct conductors.
7. Ensure that the conductors are plugged completely into the terminal points up to their
insulation.
24 RoofCommKit-P1-US-IA-xx-11
SMA Solar Technology America LLC
Installation Manual