Publicidad
Idiomas disponibles
Idiomas disponibles
◈ Specifications
Item
Printing Method
Dot Density
Printing Width
Characters per
line
Printing Speed
*1)
Receive Buffer
Printer
Size
SMPS Input
Voltage
Environmental
Conditions
MCBF *2)
Paper Width
Paper Thickness
Paper
Roll Diameter
Paper Tube
※ Note
*1) Printing speed may be slower depending on the data transmission
speed and the combination of control commands.
*2) This value is measured for a given condition such as standard
temperature, specified paper, and standard printing density, and it
may change depending on the temperature or printing level.
◈ Serial(RS-232C) Fixed Interface Model
Windows Driver Installation
1. Launch Software_STP-103III_Windows_Driver_Vx.x.x.exe.
2. Click the Next button in the opening installation window.
3. Select a com port in Serial Port box in the Port Type dialog box, and
click the Next button.
4. Select Yes and the computer will reboot.
5. After the computer has restarted, open the Printer Properties window
※ 2003 Server or XP: Control Panel> Printers and Faxes
※ Vista or later versions: Control Panel> Hardware and Sound>
Devices and Printers
6. In the Properties window, select the Port tab and click on the Port
Settings. Verify that the information which the results of the
completed after installing self-tests correspond to and click "OK"
Details
Thermal Line Printing
203 Dpi (8 dot/mm)
48mm
32 (Font A : 12x24)
42 (Font B : 9x17 / Font C : 9x24)
Approximately 3.15 inches/sec
80 mm/sec
at 25℃/printing duty 12.5%
64K bytes
100 ~ 240 VAC
0 ~ 45℃ (Operating)
Temperature
-20 ~ 60℃ (Storage)
10 ~ 80% RH (Operating)
Humidity
10 ~ 90% RH (Storage)
Mechanism
30,000,000 line
Head
50km
57.5±0.5mm
Paper thickness : 0.062 ~ 0.075 mm
Ø60 mm
Inner : Ø12mm (0.47")
Outer : Ø18mm (0.71")
(Figure 1.)
(Fig 2.)
7. Select the General tab in the properties window and click the Print
Test Page button to make sure printer is set up correctly.
◈ Parallel (IEEE1284) Fixed Interface Model
Windows Driver Installation
1. Launch Software_STP-103III_Windows_Driver_Vx.x.x.exe.
2. Select the Next button in the opening installation window.
3. Select Parallel Port from the Port Type window and click the Next
button.
4. Click the Yes button and reboot the computer.
5. After rebooting, open the Printer Properties window provided by
the operating system.
※ XP or Server 2003: Control Panel – Printers and Faxes
※ Vista or later version: Control Panel – Hardware and Sound –
Devices and Printers
6. Select the General tab in the properties window and click the Print
Test Page button to make sure printer is set up correctly.
◈ USB Fixed Interface Model
Windows Driver Installation
1. Launch Software_STP-103III_Windows_Driver_Vx.x.x.exe.
2. Select the Next button in the opening installation window.
3. Select USB in the Port Type window and click the Next button.
4-1. If using Windows Vista, Server 2008, 7, 8, Server 2012: Turn off
the printer and turn it on again then the Windows driver will be
installed automatically.
4-2. If using Windows XP/Server 2003: Turn off the printer and turn it
on again then "Found New Hardware Wizard" will pop up. Click the
Next button to install the Windows driver.
※ Note: If a warning message box pops up while Windows Driver
Installation, click the Continue Anyway or Install button.
5. After rebooting, open the Printer Properties window provided by
the operating system.
※ XP or Server 2003: Control Panel – Printers and Faxes
※ Vista or later version: Control Panel – Hardware and Sound –
Devices and Printers
◈ WEEE (Waste Electrical and Electric Equipment)
This marking shown on the product or its literature, indicates that
is should not be disposed with other household wastes at the end
of its working life, To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly
to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this
product, or their local government office, for details of where and
how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product should not
be mixed with other commercial wastes for disposal.
☎ BIXOLON Co., Ltd.
● Website http://www.bixolon.com
● Korea Headquarters
(Add) 7~8F, (Sampyeong-dong), 20, Pangyoyeok-ro241beon-gil,
Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400, Korea (ROK)
(Tel.) +82-31-218-5500
● U.S. Office
(Add) BIXOLON America Inc., 3171 Fujita St, Torrance, CA 90505
(Tel.) +1-858 764 4580
● Europe Office
(Add) BIXOLON Europe GmbH, Tiefenbroicher Weg 35 40472
Düsseldorf
(Tel.) +49 (0)211 68 78 54 0
Publicidad
