Door - Sauder Hutch Manual Del Usuario

Step 14
Refer to the enlarged diagram to identify the parts on
å
the HINGES.
The DOORS may need some adjustments. Follow the text
å
below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), loosen the
mounting screw several turns, then turn the adjusting screw in
or out. Tighten the mounting screw after making adjustments.
To adjust the DOORS up and down (vertical), loosen both
å
vertical adjustment screws. Move the DOORS up or down to the
desired location. Tighten the screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting
å
screw one turn and move the DOORS in or out, as needed.
Tighten the mounting screw after making adjustments.
Adjusting screw (horizontal)
Page 18
Mounting screw (depth)
(vertical adjustment)
417587 www.sauder.com/services