Replacing A Lamp; Technical Data - SOMFY Lighting Modulis Ramp RTS Manual De Instrucciones

Lighting Modulis RTS Ramp

8.4 Replacing a lamp

Caution! Never dispose of the lamp with domestic waste. Please take
the lamp to a collection point or an approved centre to ensure that it is
recycled.
1) Disconnect the power supply and wait for the lamp to cool down
before undertaking any operations.
2) Unscrew the cover with the protective glass (l) by turning anticlockwise
and remove it.
3) Remove the reflector dish (n) from its location using a flat blade
screwdriver or similar (o).
4) Pull the reflective dish (n) upwards to remove the lamp (p) from its
bracket.
- To fit a new lamp, replace the reflective dish (n) and slot the new
lamp into its housing.
Caution! Avoid touching the new lamp with your fingers when replacing
the defective lamp.
- Screw the cover with protective glass (l) back into its housing.
- Connect the power supply.

9. Technical data

Radio frequency
Power supply
Maximum total power
Index protection rating
Operating temperature
Safety level
40
5061612X00_LMR_RTS_livre.indb 40
Number of programmable RTS
433.42 MHz
control points
230 V ~ 50 Hz Dimensions (mm)
100 W (5 x 20W) Weight (kg)
IP44 Lamp
- 20°C to + 60°C Life time (hours)
Class I
Copyright © 2009 Somfy SAS. All rights reserved.
Installation guide
OFF
1
2
I
3
o
n
4
p
n
12 maximum
3000 x 89 x 40
4.4
Osram Halostar
G4, 12 V, 20 W
4000
30/04/09 18:44:57