DJI OSMO POCKET Guía De Usuario página 5

EN
Disclaimer and Warning
Congratulations on purchasing your new DJI OSMO
The information in this document affects your safety and your
legal rights and responsibilities. Read this entire document
carefully to ensure proper configuration before use. Failure to
read and follow instructions and warnings in this document may
result in serious injury to yourself or others, damage to your DJI
OSMO product, or damage to other objects in the vicinity. This
document and all other collateral documents are subject to
change at the sole discretion of DJI OSMO.
By using this product, you hereby signify that you have read this
disclaimer and warning carefully and that you understand and
agree to abide by the terms and conditions herein. You agree
that you are solely responsible for your own conduct while using
this product, and for any consequences thereof. You agree
to use this product only for purposes that are proper and in
accordance with all applicable laws, rules, and regulations, and
all terms, precautions, practices, policies and guidelines DJI
OSMO has made and may make available.
DJI OSMO accepts no liability for damage, injury or any legal
responsibility incurred directly or indirectly from the use of
this product. The user shall observe safe and lawful practices
including, but not limited to, those set forth in this document.
Notwithstanding above, your statutory rights under applicable
national legislation are not affected by this disclaimer.
OSMO is a trademark of SZ DJI OSMO TECHNOLOGY CO.,
LTD. (abbreviated as "DJI OSMO") and its affiliated companies.
Names of products, brands, etc., appearing in this document are
trademarks or registered trademarks of their respective owner.
Introduction
The OSMO POCKET
length, making it convenient for taking selfies. It has a built-in
LiPo battery and comes with a joystick and several buttons for
controlling the gimbal and camera. In addition, there is a phone
holder, cold shoe, and a 1/4" mounting hole on the extension
rod.
Overview (Figure A)
1. Holder
Used to secure Osmo Pocket in place and communicates
with Osmo Pocket through the 8-pin connector.
2. Cold Shoe
Compatible with lightweight accessories such as a fill light.
3. Extension Rod
Can be extended up to 500 mm.
4. Phone Holder
Used to hold a mobile phone (the max width of the mobile
phone is 83 mm) and features a smartphone adapter slot.
5. Joystick
Used to control the tilt and pan axis of the gimbal.
6. Button C1
Press to switch between Tilt Locked (pan axis follow only),
Follow (both tilt and pan axis follow), and FPV mode (all
three axes follow).
4
Extension Rod extends up to 500 mm in
TM
product.
TM