The default NVR User is admin, the default Password is blank (leave the field empty, simply click on
OK)
Before adding the IPC, please confirm that IPC is already connected to LAN.
Right click on the preview interface, pop-up shortcut interface, click "Device manage".
Match code: add cameras to NVR and configure them to work Wi-Fi
When use the function:
Add/replace a camera to the system
Match again the camera to the NVR when they lose connection
You'll need to delete the camera unreachable channel first, then match again the camera to a free
channel (free channel always shows No Video Source under Status).
How to add the camera:
Connect the camera to the same NVR switch
Right click with the mouse to popup the NVR main menu, then click Device Manage. Click
"Refresh" on upper right and wait a moment, you'll see the camera showed in upper box.
Select the camera in the upper box, select a free channel in the bottom box, click the "Match
Code" button. Wait for the system to match. Once finish, you should see the camera video on
your monitor
You can disconnect the camera from the switch and move it anywhere you want.
When it gets power, it will automatically connect to NVR and display the image on the monitor (the
camera must be in the NVR's Wi-Fi range)
After finish setup, click " OK" button, it will be saved; click "Cancel" button, it will be not save