Ninja BL610 Guia Del Usuario página 3

8. Always use appliance on a dry, level
surface.
9. Keep hands, hair, clothing, as well as
utensils out of container while blending
to reduce the risk of severe injury to
persons or damage to the appliance. A
scraper may be used but only when the
blender is not running.
10. CAUTION: Blade assembly is
sharp, handle with care. When
handling the blade assembly,
always hold by the shaft.
11. Avoid contact with moving parts.
12. DO NOT attempt to sharpen
blades.
13. DO NOT use the appliance if blade
assembly is bent or damaged.
14. To reduce risk of injury, never place the
blade assembly on base without pitcher
properly attached.
15. DO NOT operate this appliance on or
near any hot surfaces (such as gas or
electric burner or in a heated oven).
16. The use of attachments or accessories
not included with the unit such as
canning jars, is not recommended by
the manufacturer and may result in fire,
electric shock or personal injury.
17. DO NOT remove the pitcher from
the motor base while the blender is in
operation.
18. To reduce the risk of injury, NEVER
operate the appliance without the lid
in place; DO NOT try to defeat the
interlock mechanism; make sure that
the cutting blades are properly installed
before operating the appliance.
19. DO NOT expose pitcher to extreme
temperature changes.
20. CAUTION: DO NOT BLEND HOT
LIQUIDS.
21. DO NOT overfill.
22. DO NOT operate the appliance empty.
23. To reduce the risk of burns, always allow
the appliance to cool before taking off
parts and before cleaning.
24. If the appliance overheats, a thermal
switch will become activated and shut off
the motor. To reset, unplug the appliance
and let it cool down for approximately 15
minutes before using again.
25. THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use
this appliance for anything other than its
intended use. Do not use outdoors.
WARNING
are not recommended for use with this
product.
SAVE THESE
INSTRUCTIONS
www.ninjakitchen.com
Extension cords
:
3