Using The Ninja ® Professional Blender 1000; Before First Use; How To Assemble - Ninja BL610 Guia Del Usuario

Using the Ninja
Fig. 1

BEFORE FIRST USE

1 Remove all packaging material and labels from the
appliance.
2 Wash the lid, pitcher and blade assembly in warm,
soapy water with a soft cloth. Use caution
when washing the blade assembly as the
blades are very sharp.
3 Rinse and dry thoroughly.
4 The pitcher, lid and blade assembly are all
dishwasher safe. It is recommended that the lid and
blade assembly go on the top rack. Ensure that the
blade assembly is removed from the pitcher before
placing in the dishwasher.
5 The motor base can be wiped clean with a damp
cloth. Make sure the unit is not plugged into the
electrical outlet when using the damp cloth to clean
the base.
12
1.877.646.5288
Professional Blender 1000
®
Fig. 2

HOW TO ASSEMBLE

CAUTION: Make sure that the motor base is
unplugged from the power source.
1 Place the motor base on a clean, dry, level surface.
2 Lower the pitcher onto the motor base. (Fig. 1)
3 Rotate the pitcher to the left as far as it will go. As
the pitcher rotates, it will lower and the safety tabs
on the bottom of the pitcher will slide under the
safety tabs on the top of the motor base. (Fig. 2)
4 The pitcher can be placed on the motor base two
ways; the handle can be on the front right corner or
the front left corner. (Fig. 3a, Fig. 3b)
5 Holding the blade assembly by the shaft, place
it onto the gear shaft inside the pitcher. (Fig. 4)
Ensure that the blade assembly fits around the gear
shaft and that the blade shaft is standing straight.
CAUTION: Blades are sharp! Use extreme
caution when handling the blades.
Always hold them by the shaft.
Fig. 3a
Fig. 3b