Connect Pt Or Ptz Cameras; Use Pt Or Ptz Cameras - Steren CCTV-955 Manual De Instrucciones

Connect PT or PTZ cameras

Important information before you begin:
- Press the port lock with a screwdriver to connect and secure the RS485 cables for cameras.
- PT or PTZ camera RS485 cables are those that allow the communication of the DVR. It
is usually marked purple positive (+) and negative (-) gray. For more information see the
specifi cations for your camera.
1. Insert the RS485 cables from the camera in the 485+ and 485-
inputs on the rear panel of the DVR, taking care of polarization.
2. Connect the camera cable to the channel you selected in step 1
of the "PT or PTZ camera settings" instructions. If necessary use an
adapter with RCA female connector to BNC male connector.
3. Insert the power adapter to the power connector on the camera
to energize it.

Use PT or PTZ cameras

1. Once connected the camera, open the control menu:
- Press the right button of the mouse on the channel display screen and select the PTZ
option.
38 38
2. When you see the controls screen, select
the channel that you want to manipulate. On
the speed tab select a mode according to your
needs, options are: Slow, Normal, or Fast. Finally
use the arrows to operate the PTZ or PT camera.