Steren CCTV-955 Manual De Instrucciones página 82

3. In the [Dwell time] fi eld set the total time that it will take the camera to move from one
point to another and the waiting period. Be sure to set enough time for to complete the route
and display.
4. Finally, in the bottom [cruise point] fi eld enter the point which applies the changes and
confi rm with [Add].
Repeat this process by following the same steps but select different preset and points,
confi rm with [Add].
5. To delete a point, enter it in the fi eld below [dot] and click on [delete].
Use a preset or navigate
To use a preset or navigate enter the Tools menu by right clicking and select the [PTZ]
option. Then click the [Switch] button and with the [Preset] or [Cruise] option selected, enter
the desired number. Confi rm with [Start].
40 40