Brandson Equipment 302316 Manual Del Usuario página 42

7 Functions
Plus/Minus
Distance measurement
Press the "PLUS" button in the individual measurement in order to add the
next measurement value to the previous measurement value.
Press the "MINUS" button in the individual measurement in order to subtract
the next measurement value from the previous measurement value.
If you press the "CLR" button once during these steps, then the last measured
value is deleted. If you then press the "CLR" button again, then the "PLUS/MI-
NUS" function is cancelled.
Surface measurement
Press the " " button to activate surface measurement. The "
shown in the display. Press the "MEAS" button to measure the length of the
desired object.
Press the "MEAS" button again to subsequently measure the height of the object.
Now the corresponding measured surface is shown in the display.
Volume measurement
Press the " " button twice till the "
Press the "MEAS" button to measure the length of the desired object. Then press
the "MEAS" button again to measure the width of the same object. Then you
must again press the "MEAS" button to measure the height of the object.
Once you have measured the 3 values, the volume of the object is displayed in
the display of the laser rangefinder.
42
" symbol is shown in the display.
"symbol is
English