Brandson Equipment 302316 Manual Del Usuario página 43

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Indirect measurement
This mode is meant for automatic calculation of the Pythagoras theorem.
Press the "
" button once till the "
" symbol is shown in the display. Press
the "MEAS" button to perform the first measurement. Then measure the second
desired point of the object.
If the measurement result satisfies the requirements of the Pythagoras theorem,
the height of the indirect measurement is calculated automatically and shown on
the display. The average measurements are shown separately on the second and
third line.
Indirect measurement II
In this mode, the Pythagoras theorem is used twice.
Press twice on the "
" button. The "
" symbol is shown in the display.
To measure the first hypotenuse, set up the rangefinder accordingly and press the
"MEAS" button. To subsequently measure the horizontal distance and the right
angle for both triangles, set up the rangefinder and measure using the "MEAS"
button.
43
English

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

20170901dg030

Tabla de contenido