Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Hose/Control Panel
INSTALLATION STEPS
Step 1
Use M6 x 8mm bolts to attach U-shaped leg
to cooker body as illustrated. Repeat for other
two U-shaped legs.
Step 2
Attach burner, air damper, spring and
hose/control panel assembly by threading
the burner onto the hose/control panel
assembly as illustrated.
Burner
Step 3
Remove the hexagonal nut from the bottom
of the burner. Then set the burner on the
mounting strap inside the cooker stand, attach
the bottom heat shield below the strap and
secure with the hexagonal nut.
16
Publicidad
Tabla de contenido
