Multiplex PROFI CAR 403 Anexo página 4

! These operating instructions are an integral part of the prod-
uct. They contain important information and safety notes. They
should therefore be kept in a safe place where you can refer to
them at any time. If you ever dispose of the equipment be sure
to pass on these instruction to the new owner.
Dear Customer,
The present sheet is a supplement to the PROFI CAR 403 / 707 oper-
ating instructions for software version V2.xx or higher. We have
integrated the following new features in the software version V2.xx:
-
Possibility of operation with synthesizer RF module
PROFI CAR HFMS-Car
-
2-Step HIGH RESPONSE SYSTEM (HRS)
with up to 100 Hz transmission speed
-
Display of the software version
Apart from these additional features, nothing has changed regarding
the possibilities and characteristics of the unit.
Read this supplement to the operating instructions carefully before
you start up the unit. They contain important hints, useful tips and
information. Thus you will save yourself many questions and time
and protect yourself against faulty operation when using the unit.
1. S
AFETY NOTES
! Read the instructions before start-up
2. D
ISPLAY OF THE SOFTWARE VERSION
The software version of the unit is displayed together with the
transmitter type (301, 403 or 707) each time the unit is switched on!
After around 1 sec. the display changes to the standard status dis-
play with model name and battery voltage.
If there is a synthesizer RF module in the transmitter, the set channel
and the transmission frequency appear as third display indication!
( Sect. 3)
3. O
PERATION WITH SYNTHESIZER
HFMS-C
AR
For the operation of the entire MULTIPLEX PROFI CAR line with soft-
ware version V2.xx or higher two synthesizer RF modules are avail-
able:
# 4 5670
for 40/41 MHz band
# 4 5671
for 75 MHz band
A transmitter crystal is no longer required if a synthesizer RF module
is used. The channel is selected simply by menu.
Installation
Like the crystal RF module, the synthesizer RF module is plugged
into the slot provided for it.
Note
Using the standard FM/AM crystal RF module of the PROFI CAR also
continues to be possible with the software version V2.xx.
Channel selection / frequency setting
1. Switch the transmitter on with the "TOOL" button pressed
The channel selection menu appears ("CH" = channel flashes).
The momentarily set channel with channel number and trans-
mission frequency is displayed
There is no RF radiation!
2. Select the desired channel with the knurled wheel (DIGI
ADJUSTOR).
3. Switch the transmitter off
the selected channel remains saved up to the next change of
channel / transmission frequency
MULTIPLEX Modellsport GmbH & Co.KG • Neuer Weg 2 • D-75223 Niefern-Öschelbronn • www.multiplex-rc.de
Operating Instructions PROFI CAR 403 / 707
Supplement for Software Version V2.xx
Your MULTIPLEX Model Sports Team
RF
MODULE
Switching the transmitter on / activating a channel
1. Switch the transmitter on
After a brief display of transmitter type / software version and
status display, the set channel and the transmission frequency
are displayed
There is no RF radiation!
2. The channel is acknowledged by operating the handle button
RF radiation is activated!
! Note
The transmitter may only be set to and operated on the fre-
quencies/transmission channels that are approved in the rele-
vant country.
For exact information please refer to the CE memorandum (Directive
R&TTE), which is enclosed with all of our transmitters, the frequency
table in the current MULTIPLEX main catalogue, or contact the re-
sponsible authority (frequency monitoring authority) of the relevant
country.
4. T HIGH RESPONSE SYSTEM (HRS)
HE
HIGH RESPONSE - what is that?
HIGH RESPONSE is a new, clearly faster FM/PPM transmission
method with a transmission speed (pulse repetition rate) of up to
100 Hz. Advantages are:
•
higher reaction speed, especially with fast, high-resolution digital
servos
•
higher holding force and setting accuracy with analog servos
In this way the models can be controlled even faster and more pre-
cisely.
Data:
FM/AM
Modulation / PROFI CAR
operating Crystal RF
mode module
AM*
FM
HRS-3
(= FM)
HRS-2
(= FM)
*) AM operation is not possible in connection with the synthesizer RF
module HFMS-Car!
! Note
HIGH RESPONSE cannot be used with all RC components (receiver /
servo / controller)! The products listed below have been tested by us
and approved for operation with HIGH RESPONSE:
Receivers:
PiCO 3/4
PiCO 5/6
PiCO 4/5
Micro 7 / Micro 5/7
Mini 9 / Mini 7/9
Mini DS
The Micro IPD and Micro IPD CAR receivers are not approved for HRS
operation.
PROFI CAR
HFMS-Car
synthesizer Transmission
RF module
speed
⎯
60 Hz (16.6 ms)
60 Hz (16.6 ms)
40 Hz (25 ms)
90 Hz (11.1 ms)
100 Hz (10 ms)
# 5 5962
40/41MHz
# 5 5921
40/41MHz
# 5 5952
40/41MHz
#5 5941 / 5 5934
40/41MHz
#5 5961 / 5 5926
40/41MHz
#5 5958 / 5 5949
40/41MHz
Max.
chan-
nels
2
3...5
7
3
2