Adjusting The Sensitivity - Sennheiser SKM 500 G2 Instrucciones Para El Uso

In this case, "U.01" briefly appears on the display.
Use the /
frequency. Transmission frequencies are tunable in
25-kHz steps within a switching bandwidth of 36 MHz
max. For intermodulation-free frequencies, please refer
to the enclosed frequency table.
Adjusting the sensitivity –
Via the "SENSIT"
radiomicrophone's input sensitivity.
The input sensitivity is adjusted too high when close talking
distances, speakers with loud voices or loud music passages
cause overmodulation in the transmission link. When the
audio input level is excessively high (AF peak), the level
display for audio signal "AF"
If, on the other hand, the sensitivity is adjusted too low, the
transmission link will be undermodulated, which would
result in a signal with high background noise.
The sensitivity is correctly adjusted when the level display
for audio signal "AF"
the loudest passages.
Note:
For monitoring the adjusted sensitivity, the transmitter's
level display for audio signal "AF" always indicates the
audio level – even if the transmitter is muted.
The following figures are a guide to the best settings:
Loud music/vocals:
Presentations:
Interviews:
buttons to select the desired transmission
menu,
shows full deflection only during
–30 to –20 dB
–20 to –10 dB
–10 to 0 dB
SENSIT
you can
shows full deflection.
adjust the
21