Activating/Deactivating The Pilot Tone Transmission; Activating/Deactivating The Lock Mode; Exiting The Operating Menu - Sennheiser SKM 500 G2 Instrucciones Para El Uso

Activating/deactivating the pilot tone
transmission –
Via the "PILOT" menu, you can activate or deactivate the
pilot tone transmisssion.
The pilot tone supports the receiver's squelch function
(Squelch) and protects against interference due to RF
signals from other units. The transmitter adds an inaudible
signal, known as the pilot tone, to the transmitted signal.
The receiver detects and evaluates the pilot tone, and is
thus able to identify the signal of the matching transmitter
and mute all others.
Transmitters of the ew 500 series (first generation) do not
transmit a pilot tone and the receivers of the ew 500 series
(first generation) cannot evaluate the pilot tone.
Nevertheless, you can combine the radiomicrophone with a
receiver of the first generation. However, when combining
units, please observe the following:
With the ew 500 G2 radiomicrophone and an ew 500 G2
receiver:
Activate the
radiomicrophone and receiver.
With the ew 500 G2 radiomicrophone and an ew 500
receiver or vice versa:
Deactivate the pilot tone function with the ew 500 G2
radiomicrophone or receiver.
Activating/deactivating the lock mode –
Via the "LOCK" menu, you can activate or deactivate the
lock mode.
The lock mode prevents that the radiomicrophone is
accidentally programmed or switched off during operation.
The lock mode icon
mode is activated.
To deactivate the lock mode, first press the
then press the
confirm your selection by pressing the
buttons can be operated as usual.
Exiting the operating menu –
Via the "EXIT" menu, you can exit the operating menu and
return to the standard display.
PILOT
pilot tone
on the display indicates that the lock
/ buttons to select "LOC.OFF". If you
function with
SET button and
SET button, the
EXIT
both
LOCK
23