Power Tool Use And Care; Battery Tool Use And Care; Service; Safety Of Others - SKF LINCOLN PowerLuber A Serie Guía De Instalación Y Mantenimiento

4 Power tool use and care

4.1 Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for
which it was designed.
4.2 Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be
repaired.
4.3 Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preven-
tive safety measures reduce the risk
of starting the power tool accidentally
4.4 Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or
these instructions to operate the
power tool. Power tool is dangerous in
the hands of untrained users.
4.5 Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
4.6 Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
4.7 Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those
intended could result in a hazardous
situation.

5 Battery tool use and care

5.1 Recharge only with the battery
charger specified by the manufac-
turer. A charger that is suitable for one
type of battery pack may create a risk
of fire when used with another battery
pack.
5.2 Use power tools only with specifi-
cally designated battery packs. Use of
any other battery packs may create
risk of injury and fire.
5.3 When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery ter-
minals together may cause burns or a
fire.
5.4 Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. Liquid ejected from battery
may cause irritation or burns. If con-
tact accidentally occurs, flush with
water. If liquid contacts eyes, seek
medical help. Liquid ejected from the
battery may cause irritation or burns.

6 Service

6.1 Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
4

Safety of others

This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or instruc-
tion concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.

Specific safety

Always wear eye protection. The PowerLuber
can generate up to 10,000 psi (689 bar).
Use only Lincoln 1218, 1224, 1230 or 1236
outlet whip hoses. Grease injection injuries
are a very serious injury. Hold the hose only
in the area of the spring guard. Avoid acci-
dental starting. Be sure switch is not
depressed when inserting battery pack.
Replace the hose at the first sign of wear,
kink or damage to the outside jacket.
Do not bend the hose so that it becomes
kinked.
Do not overreach. Keep proper footing
and balance at all times. Proper footing and
balance enable better control of the tool in
unexpected situations.
Use safety equipment. Always wear eye
protection.
Dust mask, non-skid safety shoes, hard
hat or hearing protection must be used for
appropriate conditions.
The gun uses lubricants, that may be
flammable and poisonous if ingested.
Do not use gun near open flame or other fire
hazards.
Greases are often marketed as high
temperature because it must maintain their
lubricating properties in hot areas, but the
lubricants may be flammable if the temper-
ature is too high. Please read all warnings
on lubricants before using this gun. Do not
use flammable greases with this grease gun.