Workzone 47625-15 Manual Del Usuario página 8

Dual halogen worklight with stand
WARNING: Risk of severe burns. Lamp head and bulb are extremely
hot during and immediately after use. Touching lamp head or bulb with
bare hands while worklight is on can cause severe burns. Turn off, unplug
worklight and allow it to cool completely before attempting to change bulb.
CAUTION: Risk of damaging bulb! Never touch bulb surface with your
bare hands! The natural oil from your skin can leave a residue that could
cause the bulb to fail prematurely. If you accidentally touch the bulb with
your bare hands, wipe the bulb thoroughly with alcohol and soft cloth or
tissue before installing. ALWAYS USE A CLEAN CLOTH OR TISSUE
WHEN HANDLING THE BULB.
CAUTION: Risk of damage to worklight! The lamp head on this worklight
is designed to operate safely with a single 500-watt bulb. To avoid damage
to the worklight, only use a 500-watt (or lower wattage) halogen bulb.
DO NOT USE OVER-WATTAGE BULBS IN THIS WORKLIGHT.
Lens (UV Filter)
Wire Lens Guard
Lens Cover
Fig. 4
8
service@eurocentra.net
MODEL: 47625-15 PRODUCT CODE: 47625
Lamp Head
(Enclosure)
Vertical Adjustment Knob
AFTER SALES SUPPORT
05/2015
Assembly
Handle
1 866 558 8096