Opening Accessory Case; Accessories; Connecting The Machine - Texi Joy 48 Manual De Operación

OPENING ACCESSORY CASE

To open the accessory case, lift up the top left side
of the table and pull toward you.

ACCESSORIES

1. 3 bobbins
2. Needle set
3. Multi-function screwdriver
4. Embroidery plate
5. Oiler
6. Buttonhole opener
7. Brush
8. Buttonhole foot
9. Guide presser foot
10. Zipper foot

CONNECTING THE MACHINE

Place the machine on a stable table.
1. Connect the power cord to the machine by
inserting the 2-hole plug into the plug socket.
2. Connect the power cord plug to the electric
outlet.
3. Turn „ON" the power switch.
4. A lamp will light up when switch is turned on.
5. To disconnect, turn the power switch to the
„OFF" position, then remove plug from outlet.
Before connecting the power cord, make sure that
the voltage and frequency indicated on the machine
is the same as in your power source.
DANGER: Never leave the machine unattended when plugged in.
Always unplug this machine from the electric outlet immediately after using and before
maintenance.
set power/light switch at "OFF"
Texi Joy 48
machine socket
foot control
EN
63