Helpful Hints - Texi Joy 48 Manual De Operación

EN

HELPFUL HINTS

Problem
Upper thread breaks 1. Machine not properly threaded.
Lower thread breaks 1. Bobbin threaded incorrectly.
Machine skip
stitches
Fabric puckers
Machine makes
loose stitches or
loops
Threader does not
thread needle eye
Machine does not
feed properly
Needle breaks
Machine runs with
difficulty
82
Cause
2. Thread entwined around bobbin.
3. Needle inserted incorrectly.
4. Thread tension too tight.
5. Thread of incorrect size or poor
quality.
2. Bobbin wound unevenly or too
full.
3. Dirt in the bobbin and hook area.
1. Needle inserted incorrectly.
2. Bent or blunt needle.
3. Incorrect needle size.
4. Incorrect size needle on stretch
fabric.
1. Machine not properly threaded.
2. Bobbin threaded incorrectly.
3. Blunt needle.
4. Thread tension too tight.
1. Bobbin threaded incorrectly.
2. Machine not properly threaded.
3. Tension not adjusted properly.
1. Nedle is not raised.
2. Needle inserted incorrectly.
3. Bent needle
1. Feed dogs are lowered.
2. Lint or dust accumulated around
feed dogs.
1. Fabric pulled while sewing.
2. Needle is hitting the presser foot.
3. Needle inserted incorrectly.
4. Incorrect size needle or thread for
fabric being sewn.
1. Dirt or lint accumulated in the
hook race and feed dog.
Texi Joy 48
Correction
1. Rethread machine.
2. Clean bobbin area and rethread
bobbin case.
3. Reinsert needle.
4. Radjust thread tension.
5. Choose correct thread.
1. Rethread the bobbin.
2. Rewind the bobbin.
3. Clean the bobbin and hook area.
1. Reinsert needle.
2. Insert new needle.
3. Choose correct size needle for
fabric.
4. Use stretch needle.
1. Rethread machine.
2. Rethread the bobbin.
3. Insert new needle.
4. Readjust thread tension.
1. Rethread the bobbin.
2. Rethread machine.
3. Readjust thread tension.
1. Raise the needle.
2. Reinsert needle.
3. Insert new needle
1. Raise the feed dogs.
2. Clean the feed dogs area
1. Do not pull fabric.
2. Select correct foot and pattern.
3. Reinsert needle.
4. Choose correct size needle and
thread.
1. Remove the needle plate and
bobbin case and clean the hook
race and feed dog.