Pump Saver - Blue Clean AR 112 S Instrucciones De Montaje, Cuidado Y Uso

CARE AND MAINTENANCE
Storage
• When your pressure washer session has been
completed, turn off the power switch located on the
front of the power washer. Unplug the power cord
from the outlet. Turn off the water supply. Pull the
trigger on the spray gun 2-3 times to drain out the
excess water and to release any remaining water
pressure. Disconnect the garden hose adapter from
the water inlet. DO NOT allow the power washer to
• Remove high pressure hose from spray gun.
• Remove lance from the gun. Place the gun in the
holster on the side. Lances are placed into any of the
slots in the back of the unit.
• Make sure to discard any remaining detergent
from the bottle. Residual chemical will stick to the
container which could become cotaminated, and can

PUMP SAVER

Pump Saver is a product that protects and prolongs
the life of the pump. This will keep the internal parts
of the pump lubricated and protected from freezing
while being stored in ALL climates. It also assists with
protection from internal corrosion. The Blue Clean part
# is: PW64511 (16oz. bottle). Order online at www.
arblueclean.com
Pump Saver Instructions
Follow the previous storage instructions for your power
washer. To prevent staining, protect the surface under
protection when using this product.
Turn unit off and disconnect the gun before adding
pump protector. Unscrew threaded top from bottle to
remove seal and reattach threaded top to bottle.
Remove black cap from bottle.
1) Place top of pump saver bottle onto the garden hose
adapter.
2) Secure pump saver bottle by turning in a clockwise
direction.
92723_15ANR009 AR112S_1500PSI ENG-FR-SP.indd 13
cause the detergent injector to clog and not function
properly. Flush the bottle and nozzle head with fresh
water to prevent clogging.
• Hook the power cord around the cord hook on the
right side of the machine when facing it.
• The pressure hose is stored on the hose hook
located on the back of the handle.
• DO NOT store the power washer where it is
exposed to freezing temperatures unless you use
an antifreeze designed for pumps. Store the power
washer indoors to prevent the water in the unit from
expanding under freezing conditions. When the
water freezes and expands, your power washer will
be damaged and become inoperable. Or, if storing
outdoors, it is recommended you use pump saver (not
included) to protect pumps.
3) Turn the power on.
4) Squeeze bottle to help it into the pump.
5) Turn power off when pump saver exits the machine's
water outlet.
Note: Instructions on Pump Saver Bottle are generic and
13
2018/3/6 下午2:03