Connecting The Machine; Foot Control; Sewing Light - Texi Joy 13 Manual De Usuario

CONNECTING THE MACHINE

Place the machine on a stable table.
Connect the power cord to the
machine by inserting the plug (5)
into the plug socket placed on the
machine (4). Connect the power
cord plug (1) to the electric outlet
(3). Turn „ON" the power switch (2).
DANGER: Never leave the
machine unattended when
plugged in. Always unplug this
machine from the electric outlet
immediately after using and before
maintenance.
WARNING: Do not unplug by
pulling on the cord. To unplug, grasp the plug, not the cord.

FOOT CONTROL

Sewing speed can be varied by the foot control.
The harder you press on the control,the faster
the machine runs.

SEWING LIGHT

CAUTION: Unplug the power supply
before changing the bulb.
The sewing light is located behind the face
plate. To change the bulb, take the face plate
off the sewing machine by removing the set
screw.
•
To remove: Push and twist to the left.
•
To replace: Push and twist to the right.
Texi Joy 13 instrukcja 2017.indd 59
Texi Joy 13
EN
59
16/01/17 19:22