Needle breaks
Machine runs
with difficulty
Machine will not
run
ACCESSORIES
Texi Joy 13 instrukcja 2017.indd 73
Fabric pulled while sewing.
Needle is hitting the presser
foot.
Needle inserted incorrectly.
Incorrect size needle or thread
for fabric being sewn.
Dirt or lint accumulated in the
hook race and feed dog.
Cord not plugged into
electrical outlet.
Power switch is not turned on. Turn on the switch.
Bobbin winder spindle is
pushed to the
right.
4. Presser foot is not lowered.
5. Buttonhole sewing mode
* Buttonhole lever is not
lowered completely.
* Buttonhole foot is not
attached.
Texi Joy 13
Do not pull fabric.
Select correct foot and
pattern.
Reinsert needle.
Choose correct size needle
and thread.
Remove the needle plate and
bobbin case and clean the
hook race and feed dog.
Insert plug fully into outlet.
Push spindle to the left.
Lower the foot.
* Lower the buttonhole lever.
EN
73
16/01/17 19:22