Philips AVENT SCD520 Manual Del Usuario página 16

ENGLISH
16
- Setting room temperature range (minimum and maximum
temperature)
- Temperature alert on/off
Adjusting loudspeaker volume
1 Press the volume + or – button on the baby unit until the desired
loudspeaker volume for the baby unit has been reached.
Note: You can only set the loudspeaker volume on the baby unit when a lullaby
is playing.
2 Press the volume + or – button on the parent unit until the desired
loudspeaker volume for the parent unit has been reached.
, The display gives visual feedback on the volume settings of the
parent unit:
- j = volume switched off/silent baby monitoring
- k = minimum volume
- l = maximum volume
Note: If the volume is set to a high level, the units consume more power.
Talk function
You can use the TALK button on the parent unit to talk to your baby (e.g.
to comfort your baby).
1 Press and hold the TALK button and talk clearly into the microphone
from a distance of 15-30cm/6-12in.
The green LINK light starts fl ashing and the message 'Talk' appears
,
on the display.
2 Release the TALK button when you have fi nished talking.
Sound level lights
The parent unit continuously monitors the sound level in your baby´s room
and the sound level lights let you know if there is any activity. If your baby
cries, you see the sound level lights light up on the parent unit.
- As long as the baby unit does not detect a sound, all sound level lights
on the parent unit are out.
- When the baby unit picks up a sound, one or more sound level lights
on the parent unit go on. The number of lights that go on is related to
the loudness of the sound picked up by the baby unit.