Cleaning And Maintenance - Philips AVENT SCD520 Manual Del Usuario

- Temperature alert: off
- 'Temperature low' alert: 57°F
- 'Temperature high' alert: 86°F
Baby unit
- Loudspeaker volume: 3
- Nightlight: off
- Lullaby: 1
Accessories
Belt clip and neck strap
If the battery pack of the parent unit is suffi ciently charged, you can take
the unit with you inside and outside the house if you attach the unit to
your belt or waistband with the belt clip or if you hang it around your neck
with the neck strap. This allows you to monitor your baby while you are
moving around.
Connecting the belt clip
1 Snap the belt clip onto the parent unit.
Disconnecting the belt clip
1 Pull the belt clip off the parent unit.
Connecting the neck strap
1 Insert the end loop of the neck strap through the hole behind the
strap post. Thread the neck strap through the end loop and pull the
neck strap tight.
Disconnecting the neck strap
1 Pass the neck strap though the end loop and pull the end loop out of
the hole behind the strap post.

Cleaning and maintenance

Do not immerse the parent unit or the baby unit in water and do not
clean them under the tap.
Do not use cleaning spray or liquid cleaners.
1 Unplug the baby unit if it is connected to an electrical outlet and take
the parent unit out of the charger.
2 Clean the parent unit and the baby unit with a damp cloth.
Make sure the parent unit is dry before you put it back into the plugged-
in charger.
3 Clean the charger with a dry cloth.
4 Clean the adapters with a dry cloth.
ENGLISH
21