Ninja AF100EU Manual De Instrucciones página 23

USING YOUR AIR FRYER – CONT .
REHEAT
1 Ensure the crisper plate is in the pan.
2 Press the REHEAT button. The default
temperature setting will display. Use the
TEMP up and down arrow buttons set
your desired temperature.
START/STOP
NOTE: It is recommended to let the unit
preheat for 3 minutes before adding
ingredients. If preheating, skip step 4,
insert the empty pan and press the
START/STOP button to begin.
3 Press the TIME up and down arrows to
set your desired cook time.
START/STOP
43
4 Add ingredients to the pan. Insert the
pan in the unit.
5 Press the START/STOP button to
begin cooking.
START/STOP
6 When cooking is complete, the unit
will beep and END will appear on the
control panel display.
START/STOP
7 Remove ingredients by tipping them
out or by using oven gloves or silicone-
tipped tongs/utensils.
DEHYDRATE
1 Place your first layer of ingredients in the
bottom of the pan. Then install the crisper
plate inside the pan and set a second layer
of ingredients on the crisper plate.
2 Insert the pan in the unit.
3 Press the DEHYDRATE button. The
default temperature will display. Use the
TEMP up and down arrow buttons to set
your desired temperature.
START/STOP
4 Press the TIME up and down arrow
buttons to set your desired cook time.
START/STOP
5 Press the START/STOP button to start
dehydrating.
START/STOP
6 When dehydrating is complete, the unit
will make a beep sound and END will
appear on the control panel display.
START/STOP
NOTE: You can increase your
dehydrating capacity with the multi-
layer rack. If the rack is not included
with your model, it is available for
purchase at ninjakitchen.eu
n i n j a k i tc h e n . e u 44