Before First Use; Getting To Know Your Air Fryer; Function Buttons; Operating Buttons - Ninja AF100EU Manual De Instrucciones

BEFORE FIRST USE

Remove and discard any packaging material, promotional labels and tape from the unit.
1
2 Remove all accessories from the package and read this manual carefully. Please pay
particular attention to operational instructions, warnings and important safeguards to
avoid any injury or property damage.
3 Wash the ceramic-coated pan and crisper plate in hot, soapy water, then rinse and dry
thoroughly. The pan and crisper plate are also dishwasher safe. NEVER clean the main
unit in the dishwasher.

GETTING TO KNOW YOUR AIR FRYER

FUNCTION BUTTONS

AIR FRY: Use this function to give your food
crispiness and crunch with little to no oil.
ROAST: Use the unit as a roaster oven for
tender meats, baked treats and more.
DEHYDRATE: Dehydrate meats, fruits and
vegetables for healthy snacks.
REHEAT: Revive leftovers by gently warming
them, leaving you with
crispy results.
39
When setting time, the digital
display shows HH:MM. Display
START/STOP
currently reads 23 minutes.

OPERATING BUTTONS

TEMP arrows: Use the up and down
TEMP arrows to adjust the cook
temperature before or during cooking.
TIME arrows: Use the up and down
TIME arrows to adjust the cook time in
any function.
START/STOP button: After selecting the
time and temperature, start cooking by
pressing the START/STOP button. You can
stop cooking at any time by pressing this
button again.
button: The Power button shuts off the
START/STOP
unit and stops all cooking modes.
STANDBY MODE
After 10 minutes with no interaction
with the control panel, the unit will enter
standby mode. The Power button will be
dimly lit.

USING YOUR AIR FRYER

To turn on the unit, first plug the power cord
into a wall socket. Press the power button.
AIR FRY
Ensure the crisper plate is in the pan.
1
2 Press Air Fry button. The default
temperature setting will display. Use the
TEMP up and down arrows to set your
desired temperature.
START/STOP
NOTE: It is recommended to let the unit
preheat for 3 minutes before adding
ingredients. If preheating, skip step 4,
insert the empty pan and press the
START/STOP button to begin.
3 Press the TIME up and down arrow
buttons to set your desired cook time.
START/STOP
4 Add ingredients to the pan. Insert the
pan in the unit.
5 Press START/STOP to begin cooking.
START/STOP
NOTE: To toss the ingredients during
cooking, remove the pan and shake back
and forth. Reinsert the pan and cooking
will resume.
n i n j a k i tc h e n . e u 40