General Safety Instructions; Suitable Personnel - Amann Girrbach ceramill mikro ic Modo De Empleo

2 General Safety Instruc-
tions
When installing, starting-up and operating the
machine, always observe the following safety
instructions:
CAUTION:
A defective machine can lead to malfunctions!
On detection of damage or a functional defect of
the machine:
▷ Label the machine as defective.
▷ Prevent further operation until the machine
has been repaired.
NOTE:
Possible machine damage through insufficient
cooling during grinding operations!
▷ For grinding operations, operate the machine
only with sufficient quantities of coolant/lubri-
cant and the coolant circuit switched on.
NOTE:
▷ Switch the machine off when not in use or
unsupervised for longer periods, e.g., over-
night. This method of saving electrical energy
also benefits the environment.
G E N E R A L S A F E T Y I N S T R U C T I O N S
3

Suitable Personnel

NOTE:
Starting-up and operation of the machine may
only be carried out by trained specialised per-
sonnel.
E N
29