PLASTITALIA I Plast 105 Manual Del Usuario página 6

iii) Introduction
Plastitalia S.p.A. is free to modify the features of the control unit described in this user manual and the information contained in it
without any notice. Updates of this manual are available on www.plastitaliaspa.com
All rights reserved, It is strictly prohibited to reproduce this document or part of it in any form whatsoever.
Dear Customer,
Thank you for choosing an electrofusion control unit (ECU) from the Plastitalia range of products. This manual is designed to inform
and illustrate the features and operating on the correct methods of your new electrofusion control box I Plast 105 / 60 / 30. It
contains all the technical information and documentation for correct and safe use of the equipment by qualified operators. Please
read all parts of the manual carefully and keep it in a safe place for future consultation of the ECU. The manual is designed to allow
an easy and immediate use of the ECU and for this reason it is divided into two parts. The first, which describes the basic functions
for the welding of electrofusion fittings and the second part - included into the digital supports - showing all the complex and
advanced functions that this new and unique electrofusion control unit is able to perform simplifying your work.
We are confident that you will enjoy getting to know your new Electrofusion Control Unit and will be able to use it profitably for
many years to come.
All the best from,
Plastitalia S.p.A.
Pag. 6