Transport; First Use; Operation; Switching The Appliance On - UNITED OFFICE UAVS 300 A1 Instrucciones De Uso E Indicaciones De Seguridad

NOTE
► The large waste collector
until you hear it click into place. Otherwise, the appliance will not start!
► The safety switch
e
has been pushed in correctly, allowing the appliance to be used.

Transport

♦ The appliance comes with four castors
the levers on the two castors with locking levers
upwards (see fig 5). The appliance can now be rolled conveniently.
♦ Press the levers on the two castors with locking levers
you have parked the appliance in order to prevent the appliance from rolling
away (see fig. 6).
Fig. 5
NOTE
► Use the castors only on even surfaces. Do not roll the appliance over
shag-pile carpets (e.g. flokati, tufted). These could block the castors.
► Always hold the appliance by the two integrated carrying recesses
lift it up.

First use

NOTE
► Make sure the REV/OFF/AUTO/FWD switch
before plugging the appliance into the power socket.
► Every shredder is tested for functionality after manufacture. It is possible
that you may find paper residue in the cutting blades.
♦ Insert the plug into a mains power socket.

Operation

Switching the appliance on

♦ Move the REV/OFF/AUTO/FWD switch
shredding. The power lamp
appliance is now ready for use.
UAVS 300 A1
e
must be pushed fully into the appliance base
4
will not be deactivated until the large waste collector
0
Fig. 6
6
lights up permanently blue and the
q
/ for easy transport. Release
q
by pushing the levers
q
downwards once
8
is in the OFF position
8
to the AUTO position for
GB │ IE
t
5
to
7
│
■