Accessories; Installation; Velcro Fastener Mounting; Mounting The Microphone - Alpine KCE-400BT Manual De Operación

Accessories

Check accessory parts.
KCE-400BT Module
x 1
Microphone
x 1
Velcro Fastener
x 2
Interconnection Cable
(Only for KCE-400BT
purchased in the Europe)
x 1
Power Cable
x 1
Bluetooth Interface Cable
x 1
Microphone Mounting
Brackets
x 1

Installation

Velcro fastener Mounting

For the sake of safety, mount the adapter in one of the
following locations.
• Do not mount the adapter under your feet. Do not step on
the adapter, or press excessively on it.
• Before mounting the adapter, secure enough space at its
upper side to prevent noise or to result in malfunction
when sending or receiving data.
• Depending on the adapter mounting location noise may
occur when using a Bluetooth compatible device, or a
malfunction may result when sending or receiving data. In
this case, mount the adapter in another location.
Attach one side of the Velcro fastener to the box.
Remove the backing from the other side of the Velcro
strip. Gently press the adapter onto its selected
mounting location.
Velcro
fastener

Mounting the Microphone

For the sake of safety, mount the microphone in the following
location.
• In a stable and secure location.
• In a location that does not inhibit safely driving the
vehicle.
• Mount the microphone in a location where the driver's
voice can easily be picked up.
Choose a location for the microphone that can easily pick up
the drivers voice. Requiring the driver to move towards the
mic for audibility causes a distraction that could be
dangerous.
Mount the microphone using the supplied Velcro
fastener or the bracket.
Floor
9
-EN