Alpine KCE-400BT Manual De Operación página 12

Ocultar thumbs Ver también para KCE-400BT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
Connections for the head unit with iPod Direct Connector
Bluetooth compatible unit:
CDE-9872, 9874 Series/CDE-9880R, CDE-9882Ri/CDA-988* Series/iDA-X001, 100, 200, 300 Series/IVA-W202, W205 Series/
IVA-W502, W505 Series/IVA-D105, D106 Series
• The head units CDE-9872 and CDE-9872L purchased in the America are not Bluetooth compatible.
Bluetooth compatible
Unit (Sold separately)
*
iPod (Sold separately)
1 To iPod Direct Connector
2 Interconnection Cable (KWE-460E) (Sold
separately)
* This connection is not available for the head units
purchased in the Europe. For the European users, please
refer to the card "Interconnection Cable for
KCE-400BT" supplied with the adapter.
3 The FULL SPEED
TM
(KCE-433iV) (Sold separately)
4 Microphone (Included)
Connection Cable
Fuse (7.5 A)
5 Audio Interrupt Out lead (Pink/Black)
Be sure to connect only when power is turned off,
as a malfunction may result.
6 Audio Interrupt In lead (Pink/Black)
7 ACC (Ignition) lead (Red)
To the ACC Power lead.
8 Battery lead (Yellow)
Connect this lead to a terminal that constantly
provides power (to the positive (+) post of the battery).
9 Ground lead (Black)
Connect to a metal part of chassis body with screw.
(If the Bluetooth INTERFACE is
connected, you cannot use a
device connected to the INT
lead (voice interruption, etc.).)
11
-EN

Publicidad

Tabla de contenido
loading

Tabla de contenido