Safety Instructions; Warning; Standards & Regulations - VWR 444-7016 Manual De Uso

s I
afETy NsTrUCTIoNs
Please read the entire instruction manual before operating the unit.
WarNINg! do NoT use the UNIT in a hazardous atmosphere or with haz-
ardous materials for which the unit was not designed. Also, the user should
be aware that the protection provided by the equipment may be impaired if
used with accessories not provided or recommended by the manufacturer,
or used in a manner not specified by the manufacturer.
Always operate unit on a level surface for best performance and maximum
safety.
do NoT lift the High Speed Micro Plate Shaker by the tray.
CaUTIoN! To avoid electrical shock, completely cut off power to the unit by
disconnecting the power cord from the unit or unplug from the wall outlet.
Disconnect unit from the power supply prior to maintenance and servicing.
Spills should be removed promptly.
do NoT immerse the unit for cleaning.
do NoT operate the unit if it shows signs of electrical or mechanical damage.
Earth Ground - Protective Conductor Terminal
Alternating Current
3
s & r
TaNdards EgUlaTIoNs
VWR international hereby declares under its sole responsibility that the products
comply with the requirements of the following directives and associated standards:
associated EU directives:
EMC directive 2004/108/EC
LVD directive 2006/95/EC
ROHS directive 2002/95/EC
WEEE directive 2002/96/EC
safety standards:
IEC 61010-1 Safety requirements for electrical equipment for
measurement, control and laboratory use. Part: I
General Requirements.
IEC 61010-2-051 Part II: Particular requirements for laboratory
equipment for mixing and stirring.
CSA/CAN C22.2
UL 61010-1
EMC standards:
EN 61326-1 EN 61000-4-4
IEC 61000-3-2 EN 61000-4-5
EN 61000-3-3 EN 61000-4-6
EN 61000-4-2 EN 61000-4-8
EN 61000-4-3 EN 61000-4-11
EN