Safety Instructions; Standards & Regulations - VWR Vortex Mixer Manual De Instrucciones

s I
afety nstructIons
Please read the entire instruction manual before operating the Vortex Mixer.
WARNING! DO NOT use the Vortex Mixer in a hazardous atmosphere or
with hazardous materials for which the unit was not designed. Also, the
user should be aware that the protection provided by the equipment may
be impaired if used with accessories not provided or recommended by
the manufacturer, or used in a manner not specified by the manufacturer.
Always operate unit on a level surface for best performance and
maximum safety.
DO NOT lift the Vortex Mixer by the head. All heads, including cup head,
are removable. They can pop off if lifted by them.
CAUTION! To avoid electrical shock, completely cut off power to the unit
by disconnecting the power cord from the wall outlet. Disconnect unit from
the power supply prior to maintenance and servicing.
Spills should be removed promptly. DO NOT immerse the unit for
cleaning.
DO NOT operate the unit if it shows signs of electrical or mechanical damage.
Earth Ground - Protective Conductor Terminal
Alternating Current
3
s & r
tandards egulatIons
VWR international hereby declares under its sole responsibility that the products
comply with the requirements of the following directives and associated standards:
Associated EU guidelines:
EMC directive 2014/30/EU
LVD directive 2014/35/EU
RoHS directive 2011/65/EU
Safety standards:
IEC 61010-1 Safety requirements for electrical equipment for
measurement, control and laboratory use. Part I:
General Requirements.
IEC 61010-2-051 Part II: Particular requirements for laboratory
equipment for mixing and stirring.
UL Std. No. 61010-1
EMC standards:
EN61326-1
FCC Part 15 Subpart B
EN