Grandstream DP715 Quick Start Guide página 5

Register the Handset to the DP715
Base Station
Refer to the illustration below when following the instructions
on the next page.
1. Display
2. Right display button
(display functions)
3. Up/Redial list key
4. Right/Recall key
5. On-hook/Power Key
13
6. Alphanumeric keypad
12
7. Keypad lock key
11
8. Microphone
10
9. Ringer off-key
10. Down/Calls list
9
key
8
11. Off-hook key/Hands-
free key
12. Left/Internal call key
13. Left display button
(display functions)
~5~
1
2
3
4
INT R
5
1 2 3
ABC DEF
6
4 5 6
GHI JKL MNO
7 8 9
PQRS TUV WXYZ
7
#
0
Step 1: Turning the handset ON
Press the power button
Note: The original handset included in the DP715 package is
pre-registered to the Base. To register any additional Handset,
please follow step 2 below.
Step 2: Registering the handset
1. Press .
2
2. Press or 10
3
3. Press to confirm.
2
4. Press or 10
3
5. Press to confirm.
2
6. Select "Register" and press
7. Select the base unit (1-4) desired using
and press .
2
8. Enter the base unit PIN (System PIN; default: 0000) and
press .
2
• At this stage, the message "Restart base" will appear on the
display. This requires the DP715 base station to be in subscrip-
tion mode which can be either enabled from the web con-
figuration menu or by powering cycle the base.
• The handset will now search for the base unit and register
when it has found it. The display shows standby mode after a
successful registration the handset name and handset num-
ber appear.
to turn the handset on.
5
repeatedly, select Handset.
repeatedly, select Registration.
.
2
or
10
3
~6~